Jonas L Nyberg, Managing Director – West Hemisphere, Berg Propulsion
Driven by cost and sustainability imperatives, the maritime industry is increasingly attracted by electric propulsion technology, whose benefits include compatibility with a wider range of fuels, higher levels of integration and more flexible power management.
Yet while shipping’s electrification is clearly under way, not everyone is on board: many shipowners remain unconvinced that the advantages of conventional electric propulsion are straightforward enough to warrant a shift away from diesel mechanical set-ups.
In response, Berg Propulsion has collaborated with green technology expert The Switch to develop an alternative solution that offers superior electric propulsion efficiency compared with conventional systems – alongside a robust and simplified configuration to appeal to both new and existing user groups.

Efficiency gains through consolidation
In the conventional approach to electric propulsion, power is fed from the generators into the power distribution system before moving on to the frequency controller, passing through the electric motor and finally reaching the main propeller shaft via the reduction gear. While this process offers enhanced flexibility to adapt to changing loads, energy is lost at every step.
Named ‘Direct Drive Electric’, Berg’s new solution minimises conversion losses by consolidating several of the systems that comprise a conventional electric propulsion power train.
Consolidation opportunity 1
The revised configuration uses proven permanent magnet motor technology for higher efficiency, reduced electrical losses and optimised flexibility at varying rpm, torque and pitch.
In this set-up, the electric motor is part of the propeller shaft and drives the propeller directly, with no reduction gear installed, to achieve 2–3% greater fuel efficiency. The more robust arrangement also simplifies installation, addressing the issues of systems complexity and high component numbers, which have been acknowledged as a key factor in many shipowners’ resistance to electric propulsion.
As well as improving efficiency and simplifying installation, removing the reduction gear decreases wear in ancillary components to cut maintenance requirements, while the addition of a separate bearing unit, located before the electric motor on the shaft, eliminates inherent alignment and integration issues.

Consolidation opportunity 2
The power distribution and the frequency controller – respectively responsible for 1–2% and 3–5% conversion losses in the conventional electric propulsion set-up – offer a second opportunity for consolidation.
Direct Drive Electric features a DC hub, or ‘superdrive’, that draws on the main power generation source as well as any sources of stored energy such as batteries and fuel cells. The superdrive outputs interface separately with main propulsion and hotel/other electrical systems, establishing an integrated power source that can be distributed for optimised fuel efficiency at all times.
The capacity to draw on stored energy significantly improves vessel responsiveness and efficiency, with peak loading available as required and zero-emissions battery power possible for certain operations.

Design advantages of Direct Drive Electric
Direct Drive Electric also offers advantages in propulsion system design, with the removal of gears allowing a shorter shaft line, fewer bearings and a smaller engine room footprint. In addition, the solution’s extremely high torque capability enables far larger propeller diameters than are usually possible in an electric propulsion installation, further increasing efficiency.
When combined, performance enhancements achieved through the absence of a gearbox, the superior performance of the electric motor and the larger propeller can yield efficiency gains of up to 30% as compared with conventional or podded propulsion systems.

Direct Drive Electric use cases
Already fully operational, Direct Drive Electric has been included in orders featuring Berg’s patented Twin Fin system, where it is installed within compact, hydrodynamically shaped fins custom-designed to optimise flow through the propellers and thereby minimise fuel consumption and noise.
As an example, Berg Propulsion has supplied Direct Drive Electric to a 26,000-deadweight ton self-unloading bulk carrier designed by Deltamarin and built at CSSC Chengxi Shipyard, China. The vessel, named Nukumi, has now successfully passed sea trials and been officially delivered to Canadian shipowner CSL Group; she is currently enroute to Canada where she will commence operations.
A complete electrical integration package from Berg includes variable speed permanent magnet alternators through DC switchboards, the Direct Drive Electric motors and power management with AC distribution. Furthermore, the vessel’s propulsion system has been fully adapted to optimise performance in relation to its hull form.
The CSL newbuild will be equipped with two fully feathering controllable-pitch propellers, each directly powered by a three-megawatt permanent magnet electric motor housed in the dual fins attached to the hull. Meanwhile, its four diesel-electric MaK gensets will deliver a combined total power of 9.5 MW, helping the ship to reach a service speed of 12–14 knots.
While this is a specialised application for Direct Drive Electric, the solution is also available and generating interest in applications for vessels where the motors are installed inside the hull. Examples include single-screw cargo vessels, RoPax ferries, patrol vessels and other ships whose energy transformation and operational profile are better served by an electrical set-up than by a mechanical concept.
Vessel electrification made easy
With the industry-wide transition towards vessel electrification now under way, Direct Drive Electric represents an ideal solution for integrating gas or dual-fuel engines, other fuel alternatives, fuel cells and batteries.
The solution’s robust configuration makes it a particularly attractive proposition for owners of offshore vessels, who are, in general, already convinced of the advantages of electric propulsion. At the same time, Direct Drive Electric’s ability to facilitate the integration of battery power could prove appealing to ferry operators. Owners of bunker vessels and single-screw cargo ships might be persuaded by its capacity to incorporate new low-carbon fuels and thereby support regulatory compliance.
Owners seeking to optimise efficiency, flexibility and sustainability – and whose ships require the high manoeuvrability or redundancy in which electric propulsion excels –should therefore see Direct Drive Electric as a direct response to a market need for a smoother transition to vessel electrification.











